R Quietly Cool Since 1886 USE AND CARE GUIDE GIA LED VANITY-#M00153
TOOLS REQUIRED Safety goggles Phillips screwdriver Flathead screwdriver Wire strippers Wire cutters Ladder Pliers Electrical tape HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Installation instructions 1. Installing the mounting plate CAUTION: Ensure the power is off at the main fuse box prior to beginning installation . □ Turn off the switch at the wall. □ Turn the power off at the main fuse box. □ Attach the mounting plate (BB) to the outlet box using the outlet box screws (CC). Important note: This vanity can be mounted vertical or horizontal, make sure mount the mounting plate (BB) to wall as you desired). 2.
Installation instructions (continued) 3. Hanging the fixture body □ Raise fixture body (A) to the wall and carefully tuck the wires inside the outlet box. spread the electrical splices so that the black wires are on one side of the outlet box and the white wires are on the other side. □ Hang the fixture body (A) to the wall by slide two small screws (DD) into the notches in the backplate, and then tighten the two small screws (DD).
