TOOLS REQUIRED £0) screwdriver screwdriver Wire Wire cutters Ladder strippers Electrical tape NOTE: This tier requires the use of five 120V, 60Hz, 60-Watt max, candelabra base type B bulbs (not included). Do not exceed the recommended wattage. HARDWARE INCLUDED A NOTE: Hardware not shown to actual size.
Pr-Installation (continued) PACKAGE CONTENTS © A Part Description Quantity A Chain loop 1 B Metal plate 1 Cc Finial with slot 5 D Pole assembly 1 E Arm 5 F Finial 5 G Fixture body 1
Assembly instructions 1 Assembling the fixture body oO Carefully unpack the fixture, lay out all parts on clean surface. oO Screw the pole assembly (D) to top of the fixture body (G). o Secure five arms (E) to the fixture body (G) with five finials (F) and five finials with slot ©. o Slide the metal plate (B) over to nipple on top of the pole assembly (D) and secure the chain loop (A).
Installation instructions 1 Installing the cross bar CAUTION: Ensure the power is off at the main fuse box prior to beginning installation. oO Turn off the switch at the wall. oO Turn the power off at the main fuse box. oO Install the cross bar (BB) with nipple (FF), lock nut (DD) to the outlet box using two outlet box screws (CC). o Unscrew the screw collar nut (IT) from the screw collar loop (HH). oO Slide the screw collar nut (II) and then the canopy (GG) onto the end of the chain (11).
Installation instructions (continued) 3 Hanging the light fixture o Push all excess wires into the outlet box, o Raise the canopy (GG) to the ceiling and secure in place by screwing the screw collar nut (II) onto the screw collar loop (HH). o Prior to installing the bulbs, please inspect sockets for silica packet. if packet is present, remove and throw away. do not expose to children and pets. oO Install one 120V, 60Hz, 60-watt max.
Installation instructions (continued) Care and Cleaning o Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause Solution The bulb will not light. oO The bulb is burned out. 0 Replace the light bulb. o The power is off. oO Ensure that the power supply is turned on. oO There is a faulty wire connection. oO Check the wiring. 0 The circuit breaker is off.
