Brochure

Hunter Industries Incorporated • The Irrigation Innovators
1940 Diamond Street • San Marcos, California 92069 • TEL: [phone] • FAX: [phone] © 2001 Hunter Industries Incorporated
www.HunterIndustries.com P/N 700906 10/01
A Variety of Mounting Options
Whether you offer a rain-sensing device as an upgrade to your installations
or you already install one as a standard piece of equipment, wouldn’t you
like to have options on where you must install it? The usual place to install a
rain-sensing device has been on a fl at vertical surface, such as a wall or fence.
But, with the Hunter Wireless Rain-Clik™, you can also mount the unit on
a rain gutter. In addition, Hunter offers an 8" telescoping extension rod that
brings the unit out from under a roof eave or other obstruction.
Instant Shut Off When it Rains
There are a lot of rain-sensing devices on the market
today, but all of them shut off an irrigation system only
when a pre-set level of accumulated water is reached.
That means that even after it has started raining, a system
will continue to operate, an action that can give the
impression water is being wasted (not the image that a
municipality wants to give its populous as they pass by
parks, roadways and other city-owned lands). Only the
Hunter Rain-Clik™ products, with their unique Quick Response™ feature,
allow an irrigation system to shut off immediately when it starts to rain.
Models
Wireless Rain-Clik
Dimensions
3.25" diameter x 4" high
Operating Specifi cations
• Wiring: normally closed
or normally open
• Time to turn off irrigation
system: 2-5 minutes for the
Quick Response™ feature
• Time to reset the Quick
Response™ unit: 4 hours
maximum under dry sunny
conditions
• Time to reset: 3 days maximum
under dry sunny conditions for
the total rainfall compensation
unit
• Operating temperature:
32˚F -130˚F (0˚C - 54˚C)
• Vent ring allows for adjustment
of reset delay
• UV colorfast and stable
• UL listed, FCC/DOC approved,
Australian Compliance, CUL
(CSA)
• Rain sensor transmitting range:
up to 300 ft. line of sight
Electrical Specifi cations
• Receiver Power: 22-28 VAC/
VDC, 100 mA (from timer
transformer)
• Receiver includes built-in
bypass switch, no extra switch
required
• Works with all standard
controllers
Compact Design
No ladder required
to install on
fences, decks, etc.
Gutter Clip
Wall Bracket
8" Telescoping Extension Rod
It’s as easy as 1-2-3: Install bracket in easy to access location like a fence;
Snap sensor in place; test system. No wires to string. Installs in minutes!
EXAMPLE: WIRELESS RAIN-CLIK
MODEL
WIRELESS RAIN-CLIK
PRODUCT EXPLANATION
LIT-348.PDF