User's Manual

CONNECTING TO THE CONTROLLER

Pro-C Conventional Controller (PCC Series)

The PCC series version of the Pro-C is designed so that the Solar Sync module can be installed inside the controller cabinet.

Use the two screws provided to mount the module as shown in the diagram.

1. Connect the

red

wire from the Solar Sync module to the AC1 terminal

2. Connect the

white

wire from the Solar Sync module to the AC2 terminal

3. Connect the

blue

wire from the Solar Sync module to the REM terminal

Remove

the ﬂat metal jumper from the two SEN terminals

5. Connect the

yellow

wire to one of the SEN terminals

6. Connect the

orange

wire to the other SEN terminal

Note:

For Pro-C PCC Series controllers, there are provisions

inside the controller to mount the Solar Sync module.

Pro-C PCC Controller

Solar Sync Module

P C C S E R I E S

SEN: ORANGE

SEN: YELLOW

REM: BLUE

Controller Connections

AC2: WHITE

AC1: RED