User's Manual

4
SENSOR DETAILS
Installing the Sensor
Using the screws provided, mount the Solar Sync sensor on any
surface where it will be exposed to unobstructed sun and rainfall,
but not in the path of sprinkler spray. The sensor needs to be
oriented upright and the swivel bracket can be moved for mounting
on angled surfaces. Loosen the locknut and screw before swiveling
the bracket and then retighten.
Note: The Wireless Solar Sync Sensor is designed
to operate to a maximum distance of 800 feet
(228 m) from the Wireless Receiver.
Note: Place Solar Sync where it can receive full sun.
The Sensor Gutter Mount can also be used as an optional mounting
method. The Sensor Gutter Mount (SGM) allows the Sensor to be
mounted directly to the edge of a gutter. Install the SGM on the
Sensor by removing the extension arm supplied with your Sensor
and reinstalling SGM in its place. Position the SGM on the edge of
the gutter and secure by twisting the thumb screw.
Re-use screw and nut from original extension arm
Sun
Solar Sync