User's Manual

7

InstallingtheBatteries
TheICD‐HPprogrammeroperateswith4xAAbatteries.Thebatteriessuppliedarenot
rechargeable!
Toinstallbatteries:
RemovecablesandconnectorsfromendofICD‐HP.
PrytheyellowflexibleyellowbootofftheICD‐HP.
TurntheICD‐HPover,andremovethe
2screwssecuringthebatterycompartmentcover
withasmallscrewdriver(eitherstandardorPhilips).
Insert4freshAAbatteriesasshown,observingpolarity.
Replacecoverwithscrewsandsecure.
Replaceyellowboot.
