User's Manual

23

valvesopenandclose.
DecoderFirmware
Thedecoderfirmwaremenuchecks,andhastheabilitytoupdate,adecoder’soperatingsystem(firmware).
FromtheMainMenu,usetheup/downarrowstomovethepointertoDecoderFirmware,andpressNext3.Thedisplay
willshowtwooptions,GetDecoder
VerandUpdateDecFirmware.
GetDecoderVer:MovethepointertoGetDecoderVerandpressNext3.Thiswillcheckthedecoder,anddisplaythe
versionnumber.
UpdateDecFirmware:MovethepointertoUpdateDecFirmwareandpress
Next3.Thiswilldisplaythe“LatestVersion”
loadedintotheICD‐HP,and
displayitabovetheversionfoundinthedecoder.Iftheversionsaredifferent,
youhavetheoptiontoloadthelatestversionintothedecoder.
Note:The“LatestFirmwareVersion”isloadedintotheICD‐HPoperating
system.Thiscanbeupdated,if
newfirmwareisreleased,byre‐flashingthe
ICD‐HPitselffromacomputer.Theupdateswillcontainbothstationdecoder
andsensordecoderfirmwareversionsforthedecoders.
DECODER UPDATE
----------------------
Latest Firmware Version:
#.##.###
Attached Decoder
Version: #.##.###
Press 3 To Continue