Fan User Manual

B1
D
7.25
”
7.75
”
D
Cut out an opening for the housing.
Use the motor housing as a template to mark position.
Remove the existing fan and check to make sure the
opening is large enough to accommodate the new motor
housing (7.25” x 7.75”).
Existing Construction Installation
Existing Fan
8
Remove tape.
A24
I
Push the cover into place.
41717-01 05/31/2006 41717-01 05/31/2006
41717-EngS_05.31.06.indd 8 5/31/06 3:53:27 PM