Owner Manual

www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
Note: Globe style and number of lights may vary.
See next page for fan
operation instructions.
Connect the appropriate pull
chain pendant to each of the short
chains coming from the nial
and nial cap. The fan pull chain
controls the speed: from high to
off. The light pull chain controls
the light xture: on and off.
Press the globe and globe keeper
ush against the metal plate. Thread
the light pull chain through the hole in
the center of the nial cap and thread
the fan pull chain through the hole in
the side of the cap. Finally, thread only
the light pull chain through the hole
in the nial and screw the nial onto
the threaded rod.
Install a bulb into each of the
sockets. When necessary, replace
with bulbs of the same wattage.
Finial
Finial
Cap
Light
Pull
Chain
Fan
Pull
Chain
Globe
Keeper
Metal
Plate
Globe
13
M0014-01 • 02/08/16 • © 2012–2016 Hunter Fan Company