Owner Manual

www.HunterFan.com

1.888.830.1326

Switch Housing (continued)

Make sure the lower switch housing is securely attached to

the upper switch housing. Failure to properly secure all three

assembly screws could result in the light xture falling.

Connect the plugs from the upper and

lower switch housings. Make sure to line up

the colored markings on the connectors.

Lift the lower switch housing until its

screw holes are aligned with the screw

holes in the upper switch housing. Install

the three switch housing screws, found

in the hardware bag. Tighten all

three screws.

Installing the pull chain pendant - Attach the

pull chain pendant to the short chain coming

from the switch housing.

Note: Fan style may vary.