Owner Manual

www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
Remove the plastic break away
connector. Connect the appropriate
pull chain pendant to each of the
short chains coming from the nial
and nial cap. The fan pull chain
controls the speed: from high to
off. The light pull chain controls the
light xture: on and off.
Press the globe and globe keeper
ush against the metal plate. Thread
the light pull chain through the hole
in the center of the nial cap and
thread the fan pull chain through the
hole in the side of the cap. Finally,
thread only the light pull chain
through the hole in the nial and
screw the nial onto the threaded rod.
Install the included LED
bulbs into the sockets. When
necessary, replace with bulbs of
same wattage.
Light
Pull
Chain
Fan
Pull
Chain
Note: Globe style and number of
lights may vary.
Finial
Finial
Cap
Globe
Keeper
Metal
Plate
Globe
16
M0135-01 • 05/18/17 • © 2017 Hunter Fan Company