Owner Manual

www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
Note: Globe style and number of lights may vary.
See next page for fan
operation instructions.
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
nial and nial cap. The fan pull
chain controls the speed: from
high to off. The light pull chain
controls the light xture: on and
off.
Light
Pull
Chain
Fan
Pull
Chain
Press the globe and globe keeper
ush against the metal plate. Thread
the light pull chain through the hole
in the center of the nial cap and
thread the fan pull chain through the
hole in the side of the cap. Finally,
thread only the light pull chain
through the hole in the nial and
screw the nial onto the threaded rod.
Install a bulb into each of the
sockets. When necessary, replace
with bulbs of the same wattage.
Finial
Finial
Cap
Globe
Keeper
Metal
Plate
Globe
13
M0031-01 • 02/09/16 • © Hunter Fan Company