Installation & Assembly

www.HunterFan.com

1.888.830.1326

Light Kit

Make sure the lower switch housing is securely attached to

the upper switch housing. Failure to properly secure all three

assembly screws could result in the light xture falling.

Want to install your fan without a light kit?

Go to www.HunterFan.com/FAQs and click

“How do I install my fan without the light kit?”

Install the third switch housing screw.

Tighten all three screws securely.

Partially install two of the switch housing

screws found in the bag.

Connect the plugs from the upper and lower

switch housings. Make sure to line up the

colored markings on the connectors. Align

the notches in the sides of the lower switch

housing with the upper switch housing

screws. Lift the lower switch housing. Twist

the lower switch housing clockwise to lock

into place. Then thread the fan pull chain

through the hole in the light kit.

Switch

Housing

Screw