Owner Manual

7
8
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs
Canopy Screw
Installing the Bulbs and Glass
ON
Turn Power
Loosen the thumbscrews.
Insert the globe into the
xture and retighten the
thumbscrews securely. Do
not overtighten.
Install the included LED
bulbs into the socket. When
necessary, replace with bulb
of same wattage.
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs and click “How do I install my
fan without the light kit?”
Hunter Pro Tip:
Fan style may vary.
Note:
Connect the plugs from the upper and
lower switch housings. Make sure to line
up the colored markings on the connectors.
Partially install two of the light kit screws
found in the hardware bag. Align the
notches in the sides of the lower switch
housing with the screws on the upper
switch housing. Twist the lower switch
housing clockwise to lock into place.
Install the last light kit screw.
Tighten all three screws securely.
1 of 3
2 of 3
Light Kit Screw
Light Kit Screw
bag
bag
4
STEP
5
STEP
6
STEP
Assembling the Light
WARNING
FAN FALL HAZARD
Make sure all three screws are tight to secure the
lower switch housing to the upper switch housing
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.