Brochure

L441/ L444 Four-Post Lift
Copyright © 2015 Hunter Engineering Company Form 6691-T, 05/15
Supersedes Form 6691-T, 01/14
Popular accessories
www.hunter.com
0515GAP4M.52
Electrical Requirements: (110 mode) 110V, 1 ph,
NEMA 5-15P
(220 mode) 220V, 1 ph,
NEMA L6-20P
Air pressure operating range: 110–145 psi
Air volume of inflation tank: 4.75 gallons
Wheel Clamping (nominal)
External clamping (min-max): 10 in. – 26 in.
Internal clamping (min-max): 12 in. – 28 in.
Table rotation speed
Electronic motor: 10 CW / 10 CCW
Air motor: 10 CW / 5 CCW
Maximum tire diameter: 46 in.
Maximum tire width: 14 in.
Bead loosener width: 16 in.
Noise level: 74 dB
Machine weight: 800 lbs.
Some dimensions, capacities and specifications may vary
depending on tire and wheel configurations.
TCX53 Performance Tire Changer includes:
4Multi-arm bead press system and cones
4Steel mount head with polymer inserts
4Polymer mount head
4Standard bead lever
4Bead lever protectors (polymer)
4Shovel protectors (polymer)
4Hi-grip jaw protectors (polymer)
4Inflation system
4Four storage pockets
Ordering information:
TCX53E Electric motor
TCX53EW Electric with wheel lift
TCX53EL Electric with leverless mount head
TCX53ELW Electric with leverless mount head,
wheel lift
TCX53A Air motor
20-2045-1 Add wheel lift
20-2885-1 Storage shelf
Specifications
Because of continuing technological
advancements, specifications, models
and options are subject to change
without notice.
Be sure to check out other Hunter literature for
more quality products from Hunter Engineering.
4Wheel lift eases
servicing of large
assemblies.
Allows for more
careful handling of
expensive wheels.
(20-2045-1)
4Convenient
storage for your
most used tools
and accessories.
(20-2885-1)
Wheel Lift Storage Shelf
OPTIONAL OPTIONAL
Bead press system delivers control
Demounting: Integrated Tools Ease Labor
Mounting: Difficult Processes Made Easy
4Rollers assist in bead lubrication
4Roller creates gap for lever placement
4Lower disk for bead reloosening
4Assists lifting heavy tires
4Quick single arm rotation
4Mounts many tough tires
4 Adding fixed arm allows mounting of the
very toughest combinations
The bead press system speeds and eases
clamping, lubricating, demounting and
mounting tough wheel and tire combinations.
The patented design centers on the wheel to
simplify operation.
Clamping assistance when needed
Pneumatic press cones and extension ease
external wheel clamping.
TCX53 Performance Tire Changer
Conventional Tire Changer with Bead Press System