Brochure

High-ﬂ oor-slope conditions and low-ground-clearance vehicles occasionally

require additional approach ramp length. Several options are available.

Stage 2 RX Approach Ramp Extensions

✔ RX ramp extension kit – 20-3113-1 (two included)

Adds 17.75" to the length of RX9, RX10 and RX16; or 5" to RX-12

and RX12A when substituted for 20-3112-1. Standard on RXDC.

✔ RX ramp extension kit – 20-3112-1 (two included)

12" extensions for RX10, RX12 and RX16.

Standard on RX-12 and RX12A.

(two included)

✔ RX ramp extension – 20-2169-1

(includes quick-release pins) – Adds 40" to length

of RX9, RX10, and RX16; adds 27.25" to RX-12 and RX12A,

or 22.25" to RX-12-PS/IS.

✔ RX ramp extension – 20-2189-1

(includes quick-release pins) –

Adds 50" to length

of RX9, RX10, and RX16; adds 37.25" to RX-12 and RX12A,

or 32.25" to RX-12-PS/IS.

Stage 2 Four-Post Ramp Extension Kit

(Suitable for L451 and L454 models)

✔ Four-post ramp extensions – 20-1365-1

Adds 17.5" to the length of ramps.

✔ Four-post ramp extensions – 20-2033-1

Adds 40" to the length of ramps.

RX10 Long Wheel Stops – 20-2497-1

For use with conventional sensors and low spoilers.

Adds approximately 12" in length.

Stage 2 Four-Post Ramp Extension Kit

Flush-Mount Conversion Kits

Converts surface-mount installations to

flush-mount installations, using current site

requirements.

✔ For RX-9 and RX-12 PowerSlide

Inflation Station models including RXDC

and RX40 – 20-2103-1

✔ For all other RX-9 and RX-12 models

20-2102-1

✔

For RX10, RX12A and RX16 models

20-2736-1

Flush-Mount Conversion Kits

Ramps & extensions