Brochure

AlignLights System
Hunter’s integrated AlignLights LED lighting system
provides a bright and efficient light source underneath
the vehicle.
AlignLights automatically turns on when the lift is
raised and turns off when the lift is lowered to the floor.
AlignLights is an ALI-listed accessory.
20-2766-1 – AlignLights system
Approach Ramp Extensions
Stage 2 RX Approach Ramp Extensions
147-113-1 –
Standard with RX12A.
Optional with RX10,
adds 12.75" to length.
(2 required)
Stage 2 RX Approach Ramp Extensions
147-113-1
Standard with RX12A.
Optional with RX10,
adds 12.75" to length.
(2 required)
Conversion Kits
Drive-Thru Conversion Kit
20-2498-1 – RX10, RX12A and RX16 drive-thru kit for
camera sensors adds 52" to overall length.
20-2501-1 – RX10, RX12A and RX16 drive-thru kit for
conventional sensors adds 63" to overall length.
20-2169-1 –
Adds 27.25" to RX10
or 22.25" to RX12A.
20-2189-1 –
Adds 37.25" to RX10
or 32.25" to RX12A.
20-2169-1
Adds 27.25" to RX10
or 22.25" to RX12A.
20-2189-1
Adds 37.25" to RX10
or 32.25" to RX12A.
✔ Stainless steel turnplates
(PowerSlide turnplates on PS and IS models)
Standard Equipment
OPTIONAL
✔ Flush-mounted, full-floating slipplates
(PowerSlide slipplates on PS and IS models)
✔ Two movable work steps
(not included with flush-mount installations)
✔ Louvered ramps with built-in wheel stops
✔ Front wheel stops
✔ Two wheel chocks
✔ Built-in, full-length jack rails
✔ Built-in air line kit
OPTIONAL
OPTIONAL