Brochure

Low tread depth does not always mean a vehicle is out of alignment
While tread depth measurements are useful for recommending tire replacement,
tread depth results alone are not suffi cient for recommending wheel alignment.
✔ Tire wear patterns, which
frequently result in tread depth
deterioration, are permanent
and will remain until the tire is
replaced.
✔ Even after a proper wheel
alignment, the tire will still be
fl agged with irregular tire wear
when tested.
✔ By the time a tire shows signs of
irregular wear it is
too late as
most of the useful life of the tire
is already passed.
Tire Wear & Wheel Alignment
Q: What happens when a recently aligned car
with tire wear is tested again using the
tire wear pattern to indicate alignment need?
A: It will incorrectly indicate alignment need!
Normal Camber Wear
Toe Wear
(Toe In or Toe Out)
Chopped Wear
(Cupping)
Measure more than tire wear for accurate wheel alignment assessments*
Hunter’s Quick Check
™
alignment inspection system
captures total toe and camber measurements to
accurately diagnose tire wear angles.
✔ Total toe and camber measurements can be used
to recommend alignment service.
✔ Hunter’s accuracy ensures your shop will capture
the most wheel alignment opportunities possible
without false alarms.
✔ Alignment problems can be detected early, before
the tire has a permanent irregular wear pattern.
Did you know?Did you know?Did you know?
* Requires system with Quick Check alignment sensors.