BL500 Series Brake Lathe Variable and Single Speed Combination Lathes Change from servicing rotors to drum s in seconds!
Key features at a glance Digi-Cal Option ✔ Instantly measures drum or rotor dimensions ✔ Helps technicians quickly determine total indicated runout Choice of Lathe Tooling Positive rake Negative rake ✔ Includes positive rake tooling ✔ Durable negative rake tooling available as an option Adjustable Feed Rate Self-Aligning Nut Option* Disc/Drum Con ✔ Dial fast for rapid removal or slow for final surface finish ✔ Speeds setup ✔ Eliminates po “crashing” of ✔ One-cut pass capable * Option depending on
Adjustable Spindle Speeds ✔ Provides correct speed for all size workpieces ✔ No tools required Twin Work Lamps BL505 shown with optional features ✔ Adjustable lamps illuminate both sides of workpiece ✔ Includes built-in deflector shield ntrol Lockout Clamp Screw Built-in Tool Tray otential machine ✔ Allows quick setup change from rotors to drums ✔ Keeps tools within easy reach cation reminder
Quick setup speeds brake servicing Change from rotors to drums in seconds! Change from rotors to drums... ... by loosening clamp screw, removing rotor setup, rotating twin cutter... ... set up drum service assembly and extend drum boring bar.
Digi-Cal instantly measures workpiece dimensions ✔ Quickly determines if workpiece should be discarded prior to machining ✔ Enables tech to quickly determine total indicated runout ✔ Eliminates manual calculation errors ✔ Displays measurements in inches or millimeters ✔ Determines depth of cut quicker and more accurately than “slip collar” method ✔ Helps technicians perform one-cut service with confidence Measures rotor thickness ✔ No handheld tools required Digi-Cal helps the technician determine the amo
Heavy-duty bench option* makes brake service fast and easy ✔ Heavy gauge, all-steel construction gives extra stability ✔ Rear backboard stores frequently-used adaptors within easy reach ✔ Large chip collection funnel keeps debris off the floor ✔ Optional dust containment system** protects air quality and keeps work area clean Form 4076T, 3/02 Supersedes Form 5/99 BL500 Operation Tips ips Maintenance Clean and deburr arbor shaft and ve ical face, clamp cups, cones and all other adaptors, daily Clean tool H
Expand the range of your vehicle applications with additional accessories from Hunter Hunter Passenger Car and Light Truck Adaptor Kits Customize your Hunter BL500 series lathe to match your service needs. Select the appropriate adaptor kit to service most rotors, drums and flywheels. HunterPro Passenger Car Adaptor Kit Consists of hubbed and hubless adaptors covering a whole wide range of applications fitting most passenger car rotors, drums and flywheels, including composites.
Specifications* 40 Rotor Diameter: Maximum Width: Maximum Thickness: 6" to 22" 5-3/8" 2" Drum Diameter: Maximum Width: 6" to 24" 8" Maximum Weight on 1" arbor: 200 lbs. Spindle Speed(s): BL505: 85, 110, 175 rpm BL501: 155 rpm Feed Rate: BL505: .002 to .014 in/rev (infinitely variable) BL501: 0.003 in/rev. Motor: 1.5 hp Power Requirements: 115/230 V, 15/7.5 amp 50/60 Hz, 1ph Shipping Weight: 525 lbs. (approx.
