Specification Sheet

L454/454L
Closed Front 4-Post Lift Rack
SPECIFICATIONS
MODEL FEATURES / DIMENSIONS / OPTIONS
Dimensions
Width (W1)
139.25 in.
3537 mm
Inside Width (W2)
40 in.
1016 mm
L454 Length
(L)
L454L Length
255 in.
6477 mm
287.5 in.
7303 mm
Runway Width (R)
22.5 in.
572 mm
Runway Height (H1)
75 in.
1905 mm
Stack Height (H2)
8.75 in.
222 mm
Post Height (H3)
98 in.
2489 mm
Features
JT T-PS T-IS
9000-lb Swing
Air Jacks (2)
Options Add. Length
Kit #
Approach Ramp
Extension
17.5 in.
445 mm
20-1365-1
Extended Approach
Ramp Extension
40 in.
1016 mm
20-2033-1
Drive Thru Kit
38 in.
965 mm
20-2682-1
Front Mount Power
Unit Bracket
- 20-3072-1
Rack Lighting
- 20-2993-1
For lift rack information visit:
www.hunter.com/rack
For general inquiries visit:
www.hunter.com
or call
800-448-6848
For local contact visit:
www.hunter.com/company/ndrep.cfm
Form 6880-T, 10-14a
Copyright © 2014, Hunter Engineering Company
Site Specications
Power Requirements 208-230 VAC, single phase power, 26 Amp
Air Supply Requirements 90-150 PSI (6.2-10.3 bar)
Minimum Concrete Spec.
4 in. (102 mm) thick,
3000 PSI (20,700kPA) rating
Maximum Floor Variation 3 in. (76 mm) between any two posts
Product Specications
Max. Vehicle Weight 18,000 lbs. (8164 kg)
Max. Wheelbase
General Service
L454: 193 in. (4902 mm)
L454L: 227 in. (5766 mm)
Two-Wheel Alignment
L454: 177 in.* (4496 mm)
L454L: 211 in.* (5360 mm)
Four-Wheel Alignment 158 in. (4013 mm)
Alignment Height Any of 16 lock positions
Min. Four-Wheel Alignment 88 in. (2235 mm)
Lifting Speed 64 seconds
Lowering Speed 40 seconds
Continued on Page 2
L
H2
H3
H1
W1
W2
R
L454 Closed Front 4 Post Lift
* Jacking compensation may be required to align some long wheelbase vehicles.