Brochure
Form 6020-T, 10/14
Supersedes 6020-T, 05/14
Copyright © 2014, Hunter Engineering Company
Max. vehicle weight 18,000 lbs. (8164 kg)
Max. wheelbase
General service 227” (5766 mm)
Two-wheel alignment 211” (5359 mm)
Four-wheel alignment 158” (4013 mm)
Min. four-wheel alignment 88” (2235 mm)
Max. lifting height 75” (1905 mm)
Alignment height Any of 16 lock positions
Minimum height 8 3/4” (222.25 mm)
Overall height 98” (2489 mm)
Tread width
Min. inside 40” (1016 mm)
Max. outside 85” (2159 mm)
Motor
3 hp, 208-230 VAC,
60 Hz, 1 ph
Air 80-125 psi
Because of continuing
technological advances,
specifications, models
and options are subject to
change without notice.
The Hunter L451L and L454L Lifts have been certified
under the program conducted by Automotive Lift
Institute (ALI) and ETL Testing Laboratories, to
comply with Safety Standard ANSI/ALI ALCTV-2006
and Electrical Standard ANSI/UL 201.
Open-front Closed-front
L451LJT L454LJT
Long runways with
(2) 9,000-lb. Swing Air Jacks
and stainless steel turnplates
L451LT-PS L454LT-PS
Long runways with
(2) 9,000-lb. Swing Air Jacks
and PowerSlide slipplates
and turnplates
L451LT-IS L454LT-IS
Long runways with
(2) 9,000-lb. Swing AirJacks,
PowerSlide slipplates and
turnplates, Inflation Station,
and FIA
Models
L451L Specifications
Standard and Optional Equipment
Identical to L451 and L454 Lift Racks.
0215LAP3M.43
L451L Plan View
*
* See Previous Page for Elevation View
JOINT
FREE
AREA
JOINT
FREE
AREA
31” BY 31
(787 mm BY
787 mm)
AREA FREE
OF JOINTS IN
CONCRETE
(located under
both front post
baseplates)
”
20 1/2” BY
20 1/2”
(521 mm
BY
521 mm)
AREA
FREE
OF JOINTS
IN
CONCRETE
(located
under
both rear
post
baseplates)
11’- 7 3/16”
(3535 mm)
9’- 10 11/16”
(3015 mm)
9’- 9 3/8”
(2981 mm)
12’- 3/8”
(3667 mm)
15’- 3 3/8” (4658 mm)
RECOMMENDED BAY WIDTH
22 1/2”
(572 mm)
40”
(1016 mm)
28 1/8”
(714 mm)
RUNWAY
LENGTH:
20’- 5 1/2”
(6185 mm)
OVERALL
LENGTH:
24’- 6 1/4”
(7474 mm)
RECOMMENDED
BAY LENGTH
28’- 5 1/4”
(8668 mm)
28 5/8”
(727 mm)
21’- 6 3/4”
(6572 mm)
ROOM FOR ALIGNMENT CONSOLE
HAWKEYE AND PRONTO SYSTEMS
HAVE SPACE REQUIREMENTS IN
FRONT OF THE LIFT THAT MUST BE
MET, REFER TO APPROPRIATE
SENSOR SITE REQUIREMENTS.
31 1/2”
(768 mm)
L451L
4”
(102 mm)
Form 6020-T, 10/14
Supersedes 6020-T, 05/14
Copyright © 2014, Hunter Engineering Company
Max. vehicle weight 18,000 lbs. (8164 kg)
Max. wheelbase
General service 227” (5766 mm)
Two-wheel alignment 211” (5359 mm)
Four-wheel alignment 158” (4013 mm)
Min. four-wheel alignment 88” (2235 mm)
Max. lifting height 75” (1905 mm)
Alignment height Any of 16 lock positions
Minimum height 8 3/4” (222.25 mm)
Overall height 98” (2489 mm)
Tread width
Min. inside 40” (1016 mm)
Max. outside 85” (2159 mm)
Motor
3 hp, 208-230 VAC,
60 Hz, 1 ph
Air 80-125 psi
Because of continuing
technological advances,
specifications, models
and options are subject to
change without notice.
The Hunter L451L and L454L Lifts have been certified
under the program conducted by Automotive Lift
Institute (ALI) and ETL Testing Laboratories, to
comply with Safety Standard ANSI/ALI ALCTV-2006
and Electrical Standard ANSI/UL 201.
Open-front Closed-front
L451LJT L454LJT
Long runways with
(2) 9,000-lb. Swing Air Jacks
and stainless steel turnplates
L451LT-PS L454LT-PS
Long runways with
(2) 9,000-lb. Swing Air Jacks
and PowerSlide slipplates
and turnplates
L451LT-IS L454LT-IS
Long runways with
(2) 9,000-lb. Swing AirJacks,
PowerSlide slipplates and
turnplates, Inflation Station,
and FIA
Models
L451L Specifications
*
Standard and Optional Equipment
Identical to L451 and L454 Lift Racks.
1014KAP5M
L451L Plan View
**
** See Previous Page for Elevation View
JOINT
FREE
AREA
JOINT
FREE
AREA
31” BY 31
(787 mm BY
787 mm)
AREA FREE
OF JOINTS IN
CONCRETE
(located under
both front post
baseplates)
”
20 1/2” BY
20 1/2”
(521 mm
BY
521 mm)
AREA
FREE
OF JOINTS
IN
CONCRETE
(located
under
both rear
post
baseplates)
11’- 7 3/16”
(3535 mm)
9’- 10 11/16”
(3015 mm)
9’- 9 3/8”
(2981 mm)
12’- 3/8”
(3667 mm)
15’- 3 3/8” (4658 mm)
RECOMMENDED BAY WIDTH
22 1/2”
(572 mm)
40”
(1016 mm)
28 1/8”
(714 mm)
RUNWAY
LENGTH:
20’- 5 1/2”
(6185 mm)
OVERALL
LENGTH:
24’- 6 1/4”
(7474 mm)
RECOMMENDED
BAY LENGTH
28’- 5 1/4”
(8668 mm)
28 5/8”
(727 mm)
21’- 6 3/4”
(6572 mm)
ROOM FOR ALIGNMENT CONSOLE
HAWKEYE AND PRONTO SYSTEMS
HAVE SPACE REQUIREMENTS IN
FRONT OF THE LIFT THAT MUST BE
MET, REFER TO APPROPRIATE
SENSOR SITE REQUIREMENTS.
31 1/2”
(768 mm)
L451L
4”
(102 mm)
Be sure to check out other Hunter
literature for more quality products
from Hunter Engineering.
* L451L/L454L specifications are identical.
Be sure to check out other Hunter
literature for more quality products
from Hunter Engineering.
Be sure to check out other Hunter
Be sure to check out other Hunter
Be sure to check out other Hunter
Form 6020-T, 10/14
Supersedes 6020-T, 05/14
Copyright © 2014, Hunter Engineering Company
Max. vehicle weight 18,000 lbs. (8164 kg)
Max. wheelbase
General service 227” (5766 mm)
Two-wheel alignment 211” (5359 mm)
Four-wheel alignment 158” (4013 mm)
Min. four-wheel alignment 88” (2235 mm)
Max. lifting height 75” (1905 mm)
Alignment height Any of 16 lock positions
Minimum height 8 3/4” (222.25 mm)
Overall height 98” (2489 mm)
Tread width
Min. inside 40” (1016 mm)
Max. outside 85” (2159 mm)
Motor
3 hp, 208-230 VAC,
60 Hz, 1 ph
Air 80-125 psi
Because of continuing
technological advances,
specifications, models
and options are subject to
change without notice.
The Hunter L451L and L454L Lifts have been certified
under the program conducted by Automotive Lift
Institute (ALI) and ETL Testing Laboratories, to
comply with Safety Standard ANSI/ALI ALCTV-2006
and Electrical Standard ANSI/UL 201.
Open-front Closed-front
L451LJT L454LJT
Long runways with
(2) 9,000-lb. Swing Air Jacks
and stainless steel turnplates
L451LT-PS L454LT-PS
Long runways with
(2) 9,000-lb. Swing Air Jacks
and PowerSlide slipplates
and turnplates
L451LT-IS L454LT-IS
Long runways with
(2) 9,000-lb. Swing AirJacks,
PowerSlide slipplates and
turnplates, Inflation Station,
and FIA
Models
L451L Specifications
*
Standard and Optional Equipment
Identical to L451 and L454 Lift Racks.
1014KAP5M
L451L Plan View
**
** See Previous Page for Elevation View
JOINT
FREE
AREA
JOINT
FREE
AREA
31” BY 31
(787 mm BY
787 mm)
AREA FREE
OF JOINTS IN
CONCRETE
(located under
both front post
baseplates)
”
20 1/2” BY
20 1/2”
(521 mm
BY
521 mm)
AREA
FREE
OF JOINTS
IN
CONCRETE
(located
under
both rear
post
baseplates)
11’- 7 3/16”
(3535 mm)
9’- 10 11/16”
(3015 mm)
9’- 9 3/8”
(2981 mm)
12’- 3/8”
(3667 mm)
15’- 3 3/8” (4658 mm)
RECOMMENDED BAY WIDTH
22 1/2”
(572 mm)
40”
(1016 mm)
28 1/8”
(714 mm)
RUNWAY
LENGTH:
20’- 5 1/2”
(6185 mm)
OVERALL
LENGTH:
24’- 6 1/4”
(7474 mm)
RECOMMENDED
BAY LENGTH
28’- 5 1/4”
(8668 mm)
28 5/8”
(727 mm)
21’- 6 3/4”
(6572 mm)
ROOM FOR ALIGNMENT CONSOLE
HAWKEYE AND PRONTO SYSTEMS
HAVE SPACE REQUIREMENTS IN
FRONT OF THE LIFT THAT MUST BE
MET, REFER TO APPROPRIATE
SENSOR SITE REQUIREMENTS.
31 1/2”
(768 mm)
L451L
4”
(102 mm)
Be sure to check out other Hunter
literature for more quality products
from Hunter Engineering.
* L451L/L454L specifications are identical.
L451L Plan View
L451L Plan View
**