Alignment Accessories
CodeLink ® The New Last Step in Alignment Service CodeLink directly “links” the vehicle OBD-II to the aligner to reset steering system sensors, as required by the manufacturer. ® 2 20-2150-1 CodeLink with XF2 Pod Kit* Data link from WinAlign to the vehicle OBD-II (J1962) connector. Order this kit if you want wireless capability and do not currently own an XF2 Pod Kit. Includes CodeLink device, XF2 Pod Kit, and J1962 cable.
Remote Indicators Hunter Remote Indicators Speed Alignment Service Hunter Remote Indicators provide the operator complete control of the alignment system while making adjustments to the vehicle.
QuickGrip Adaptor Accessories ™ 20-2856-1 Roll-Around Storage Cart Kit Provides convenient access to adaptors when you need them and convenient storage when you don’t. (kit includes two carts) Single Cart (20-3082-1) 20-2528-1 Storage Bracket Kit Provides storage for adaptors on console, lift, HawkEye Elite sensor column, or Roll-Around Storage Cart Kit (11-1509-2). Standard with HawkEye Elite sensors.
Wheel-Off Adjustment Kits Make fast, accurate alignment adjustments... with the wheel removed! Wheel-Off Adjustment Kits allow the installation of alignment targets or sensors on hubs to ease adjustments with the wheel out of the way. 4 Creates easy access to alignment points 4 Applicable on more than 30% of vehicles in production 4 Kits cover all Hunter target and sensor designs Kit 20-1978-1 includes two adaptors 20-2664-1 TD Target Wheel-Off Adjustment Kit Kit includes 20-1978-1 and 20-2577-1.
Ride Height Measurement Live Ride Height Measurement and Adjustment System for HE421, HS421, HS401 and DSP600 Sensors Ride Height can change over time as a vehicle ages. These changes in ride height can prevent proper alignment. 4 Hunter Live Ride Height Adjustment allows the technician to easily measure, adjust, jounce and confirm ride height. 4 Accurately adjust ride height in just one trip around the car. 4 Make ride height adjustments in half the time.
Wheel Adaptors & Accessories Self-Centering Wheel Adaptors For Hunter HS401, DSP700, DSP600 and DSP500 Wheel Alignment Sensors Extended range fits 10" to 24.5" (254 mm to 622 mm) rims 20-2375-1 Dual-Purpose Sensor and Adaptor Mounting Kit Set of four brackets that may be mounted to HS401 columns, alignment consoles or in a horizontal position for use on RX lifts. The brackets will hold self-centering wheel adaptors and sensors/targets (not suitable for cordless sensors).
20-1792-1 Wheel Adaptor Extensions Increase maximum rim range of self-centering adaptors from 24.5" (622mm) to 28" (711mm). Compatible with 175-321-1 and 175-325-1 Self-Centering Adaptors. Kit 20-1792-1 contains 16 pieces, four for each adaptor. 1 175-214-1 BMW Quick Clamp Adaptor Hunter Quick Clamp Adaptor approved by BMW. BMW special adaptors with large tire hooks and 100 mm pins. For use with all HawkEye HS401 and DSP sensors. (Replacement only for older installations.
20-1898-1 Rim Stud Retainer Kit Rim Stud Retainers for mounting adaptors. Compatible with all current production slip-on spade sleeves. Standard and compatible with 175-321-1 and 175-3251 Self-Centering Adaptors. Kit includes eight retainers covering two adaptors. 20-1522-1 Spade Sleeve Kit Kit includes eight Rim Guard Tire Sleeves (106-118-2), covering two adaptors. 20-823-1 Rim Stud Extension Kit Kit includes eight Rim Stud Extensions (134-81-1), covering two adaptors.
20-1770-1 Instrument Support Kit Set of four brackets mount to DSP600 or DSP400 columns. The brackets will hold self-centering wheel adaptors and sensors/targets (not suitable for cordless sensors). Compatible with 175-321-1 and 175-325-1 Self-Centering Adaptors. 20-1762-1 Instrument Support Adaptor Plate Kit Set of four adaptor plates allow DSP500 hangers to be mounted to alignment cabinets that only have mounting holes for older, horseshoe-style sensor supports.
Alignment Tools, Kits & Accessories Drawer Organizer Kit 20-2199-1 Drawer Organizer Kit Provides dividers and tool and part organizers for the drawers on WA445, WA444, WA245, WA244, R811P and R611P consoles. Does not include 20-1561-3 Alignment Tool Kit or 20-1575-3 Shim/Bushing/CAM Assortment. * Drawer Organizer Kit requires a four-week lead time. Shim/Bushing/CAM Assortment 20-1575-3 Shim/Bushing/CAM Assortment This kit contains many of the more commonly used shim, bushing and CAM correction kits.
Alignment Tool Kit 20-2198-3 Alignment Tool Kit This kit contains many of the more commonly used correction tools. Kit includes: RP5-88-343 RP5-88-343 Full contact/dual angle rear shim tab cutting tool works equally well on both the original design or the new SYSTEM 2000 universal design RP5-88-1110 RP5-88-1110 3/8-in.
Console Accessories & System Upgrades 20-2900-1 Bar Code Reader Kit for WA370/470, WA380/480 Includes a 2D Bar Code Reader. 20-2389-1 Bar Code Reader Storage Tray for WA330/430, WA340/440 Provides a storage tray for a bar code reader cradle and an alternative mounting for the bar code reader itself. (Bar Code Reader not included) 20-2538-1 Bar Code Reader Kit for WA330/430, WA340/440 Includes a 2D Bar Code Reader and shelf.
Quick Check ™ The inspection process that locates repair orders in under three minutes 20-2813-1 CodeLink* Retrieves emission codes. Wirelessly transfers important vehicle information to console. 20-2782-1 Tire Tread Depth* Quick and easy tire wear check. Conditions transmitted to console automatically. *Requires WinAlign 14.1 software in Quick Check mode. ® 14 ™ 20-2781-3 Battery Health* Tests battery to OEM specs. Sends results to console wirelessly in 10 seconds.
HunterNet and WinAlign Tuner ™ ™ Enhance your point-of-sale performance HunterNet (HunterNetwork.com) provides front-shop personnel with quick, convenient access to a vast collection of vehicle-specific undercar information to help explain and sell service.
Alternative Mounting Options HS401 Sensors 20-2479-1 CM Sensor Mounting Kit for Compact Cabinets Replaces the existing cabinet base with a wider, more stable base for the HawkEye HS401CM sensors. This kit supports WA233, WA234, WA131, WA132, and S811 cabinets. 20-2313-1 Alternative Mounting Base for Pronto and PA121 Floor-mounted base holds a Pronto or PA121 console and wheel adaptors with targets.