User's Manual

DSP700 Series Wireless Wheel Alignment Sensors Getting Started
•
3
1. Getting Started
1.1 About This Manual
This manual contains important operation, maintenance, and safety information for the
DSP700 series sensors. It is supplemented by the alignment system console operation
manual. Read and become familiar with the contents of these publications.
A calibrated set of DSP700 series sensors can be used with any Hunter aligner using
WinAlign
®
software version 11.1 or greater.
A calibrated set of DSP700 series sensors can be used with a PA100 series aligner with
Pro-Align
®
software version 1.10.X or greater.
NOTE: Due to the charging system, only cabinet style aligners may be
used. Wall/column mounted aligners are not supported.
1.2 For Your Safety
Hazard Definitions
Watch for these symbols:
CAUTION: Hazards or unsafe practices that could result in minor personal
injury or product or property damage.
WARNING: Hazards or unsafe practices that could result in severe
personal injury or death.
DANGER: Immediate hazards that will result in severe personal injury
or death.
These symbols identify situations that could be detrimental to your safety and/or cause
equipment damage.