User's Manual

BETA - WS602 Series Wheel Alignment Sensors Maintenance
• 23
5. Maintenance
5.1 WS602 Battery Replacement Instructions
This procedure provides instructions for replacing the battery pack in WS602 wireless
sensors.
Remove the battery as follows:
1. Depress the upper and lower release buttons on the battery cover and
remove.
2. Tilt sensor back and remove battery.
Replace the battery as follows:
1. Insert the battery with the positive terminal on top.
2. Replace the battery cover.
BATTERY CAP
BATTERY
TERMINAL
5.2 WS602 Hot Swap Battery Replacement Instructions
This procedure provides instructions for hot swapping the battery pack in
WS602 wireless sensors during an alignment procedure. Hot swapping the battery will
recall/retain the information in the sensor if the alignment procedure is still in progress.
If the sensor was compensated prior to swapping the battery, the sensor will indicate it by
illuminating the middle compensation indicator while flashing the two outer compensation
indicators.
1. Remove and replace the battery as described above.
2. Restore the sensor to its original position.