User's Manual

2. Mounting Sensors

2.1 Mounting Sensors onto Wheel Adaptors

IMPORTANT BETA NOTE:

When using this BETA set of WS602 sensors, the long toe arm

sensors MUST be mounted in the rear. The sensors will not

function correctly if the long toe arm sensors are mounted in the

front.

Production versions of the sensors will allow for front or rear

mounting of the long toe arm sensors, providing the ability to

clear front air dams, rear mud flaps, etc.

Sensors may be mounted on the wheel adaptors before mounting the wheel adaptors on

the vehicle. In some cases, it may be easier to mount the wheel adaptor first and then

mount the sensor onto the adaptor. Either method may be used.

CENTER CASTIN

UPPER CASTIN

LOWER CASTING

ADAPTOR

LOCKIN

LE VE

SENSOR SHAFT

MOUNTING HOLE

If detached, attach the sensor to the wheel adaptor by inserting the sensor mounting

shaft (at the rear of the sensor) into the sensor mounting hole in the middle of the center

casting.

NOTE: The sensor shaft must be fully inserted into the sensor shaft

mounting hole.

BETA - WS602 Series Wheel Alignment Sensors Mounting Sensors • 11