Brochure

6
Flange plate for
center-clamp
tire changers
RP6-G1000A87
Useful for plastic-faced
wheels and/or reverse
wheels where maximum
fi nish protection is needed.
Max diameter 230mm.
Flange plates
for clad wheels
RP6-G1000A123
For plastic-faced
wheels only.
Flange plate for
center-clamp
tire changers
RP6-G1000A87
Useful for plastic-faced
wheels and/or reverse
wheels where maximum
fi nish protection is needed.
Max diameter 230mm.
Flange plates
for clad wheels
RP6-G1000A123
For plastic-faced
wheels only.
Long flange plate pins
RP6-G1000A102
Optional pins are longer, allowing
servicing of reverse wheels with
extra deep spokes. For use with
Hunter center-clamp fl ange plate
(RP6-G1000A87).
Drive pin protectors for
center-clamp tire changers
RP6-710090480
Plastic cap protects lug holes of
reverse wheels when clamped
face down.
Drive pin protectors for
Long flange plate pins
Short drive pin – 135-486-2
Useful when servicing some reverse
wheels. Also useful in combination
with older 20-2341-1 19.5 kits and
GM 16 in. dually wheel service. Now
included as standard with 19.5 in. kit.
19.5-inch truck center cone adaptor kit 20-2341-1
Adapts large center-bore wheels to center-clamp tire changers
(TC3700, TC3300, TCA34, TCA28).
Rubber protection plate for center-clamp
tire changers – RP6-710013421
Soft, rubber plate protects rim when servicing reverse wheels.
Intended to be removed when not servicing reverse wheels.
TC3900, TC3700, TC3510,
TC3300 & TC3250
TC-series accessories