Manualshelf

User's Manual

ManualsBrandsHunter Engineering ManualsElectronicsHunter Model 146-59-1, Alignment Console RF Remote Control
123456789
1 of 8
Form 6754-T, 05-15
Supersedes Form 6754-T, 12-13
SETUP INSTRUCTIONS FOR
REMOTE CONTROL 146-57-1 & 146-59-1
This procedure should be performed only by an authorized factory representative.
This document provides information for installation and setup of the XF remote controller. Second generation
remotes require a different procedure to set the wireless channel.
146-57-1
146-59-1
Figure 1.
CONSOLE CHANNEL SELECTION
In most cases, the wireless channels should be correctly set from the factory. Use this
procedure if there is a wireless channel conflict.
1. From the setup menu, under “Sensors”, select “Cordless Channel Selection”.
Figure 2.