User's Manual

INSTALLATION
4
Mount the Installation Brackets — Inside Mount
Prepare the Installation Brackets
■ If using the optional back cover: Use pliers or
heavy duty scissors to remove the top tabs on the
installation brackets.
➤ Then remove the top tab on the back cover
brackets.
➤ Snap the prongs on the back cover brackets into
the holes on the back of the installation brackets.
■ If not using the optional back cover: Remove the
top tab only on the installation brackets.
NOTE: Save these tabs once removed. They may be used as shims, if necessary.
Mount the Installation Brackets
■ Mark 2" to 3" from each jamb for bracket location.
➤ If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
Tab
Remove Top Tab
Back Cover Bracket
Space Evenly
Space Evenly
2" to 3"
2" to 3"
Jamb Jamb