User's Manual

OPERATION

Problem The shade will drift up once stopped.

Solution

Removing Spring Tension

■ Locate the adjustment behind the LEFT end cap cover.

➤ The cover is removed by placing your thumb in the center and releasing

the snap on the top back corner.

■ Raise the shade completely and hold into place.

■ Push a

" Allen wrench into the access hole in the end cap of the shade

(about a

").

CAUTION: When pressing the

Allen wrench into the end, you are

compressing a spring and freeing the

lock from engagement.

To re-engage the lock, simply pull the Allen

wrench straight out of the end cap access hole.

➤ Using

turn increments, rotate Allen wrench counter-clockwise to add

tension. Test and repeat, if necessary.

Problem The shade is hard to raise or lower, or will not raise or lower.

Solution Shades cannot be forced into tight inside mount window openings. If an inside

mount, make sure there is clearance between the ends of the shade and the

window casement.

Check that the installation brackets are level. Shim to level, if necessary.

Problem Vanes do not align on side-by-side shades.

Solution Vane alignment is only guaranteed within

" when shades are ordered at

the same time, at the same height, with the same color and fabric, and when

speciﬁed on the order form.

Check that the windows are square and the sameheight.

Push in

at Least