User's Manual

INSTALLATION
11
■ Position the battery wand so the power cable is easily connected to the socket.
■ Snap the battery wand into the wall mount bracket.
■ Replace the cover with the slot aligned to the socket in the battery wand.
■ Plug the power cable from the shade into
the extension cable.
■ Plug the other end of the extension cable
into the socket in the battery wand.
■ Two-On-One Headrail Shades. Plug in both
power cables into the extension cables and then
plug both extension cables into the sockets in the
battery wands.
Proceed to “Attach Magnetic Hold-Down Brackets (Optional)” on page14
or “Testing the Shade” on page15.
Socket
Battery Wand Cover
Slot
Socket
Battery Wand Cover
Extension
Cable
Power Cable
from Shading