User's Manual

Transfer your hub data (if needed).
If you have a Gen 1 Hub (above left) on your PowerView
®
Shade
Network, follow in-app instructions to transfer Hub data to the
new PowerView
®
Hub.
9
CONNECTIONS
Test signal to Repeater(s).
Press and hold the P button on the back of the PowerView
®
Hub.
The light on each Repeater should blink BLUE. If the Repeater
does not blink BLUE, move the Repeater closer to the Hub or
pair the Repeater to the correct PowerView
®
Shade Network.
Other controls on the back of the Hub include the R button
which power cycles the Hub and erases all Hub data when
pressed and held for 6 seconds.