User's Manual

Connect Hub to Internet connected wireless router.
Connect using an active Wi-Fi network:
Open the PowerView
®
App on your mobile device and follow
the on-screen instructions to properly connect to an active
Wi-Fi network. The Hub will continue to blink AMBER, once
the Hub has been connected to the home network.
Connect using an Ethernet cable (optional)
Connect the Ethernet cable from the Hub to an open LAN port on your router.
The Hub will continue to blink AMBER, once it has been connected to the
home network.
Connect power to Hub.
1. Connect one end of the USB power cable to the USB power
supply.
2. Plug the USB power supply into an AC outlet or power strip.
3. Plug the other end of the USB power cable into the power port
on the back of the Hub.
Note: During the boot-up process, the Hub’s LED may turn off and on again. Once
the Hub has completed the boot-up process, it will consistently blink AMBER. Do not
interrupt the boot-up process by cutting power or pressing any buttons on the back
panel of the Hub.
5
Note: If connecting the Hub to the home network via Ethernet, connect the
Hub to the router, before connecting the Hub to power.
CONNECTIONS
Wireless Router
Power Supply
Repeater
PowerView Hub