User's Manual

NOT FOR DISTRIBUTION

PowerView

™

AC motor

Quick Start Guide

— Release Candidate —

9 of 11

As with any 120V~ or 220V~ electrical appliance, care must be taken, when handling. To reduce the

risk of electric shock, this equipment has a grounding type plug, that has a third (grounding) pin.

Motor models M40PV330 / M40PV334 / M40PV430 / M40PV620 / M40PV624 / M40PV915 are

supplied with UL rated grounding power cords that have a grounding pin which shall not be altered or

removed. This plug will only fit into a grounding type outlet. If the plug does not fit into the outlet,

contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

Use appropriate Class 2 wiring, whenever installing dry contact cabling with motor models

M40PV330 / M40PV334 / M40PV430 / M40PV620 / M40PV624 / M40PV915.

If this device is installed in the presence of strong Radio Frequency (RF) signals (such as near RF

transmitters) loss of functionality may occur.

Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate this equipment.

If used in an area susceptible to lightning strikes or power surges, surge protectors should be used.

Otherwise, unplug this operator and accessories during lightning storms.

Motors are not rated for exterior use. Water can cause shorting and result in electrical shock.

WARNING: FOR INTERIOR USE ONLY.

Before installing the motor, remove any unnecessary cords and disable any equipment not needed for

powered operation.

If motor malfunctions, disconnect immediately and call the installer or dealer for servicing information.

D. Maintenance:

All PowerView AC motor models shall be kept free of dirt, moisture, and debris.