User's Manual

NOT FOR DISTRIBUTION
PowerView
™
AC motor
Quick Start Guide
— Release Candidate —
Release Candidate ©2016 Hunter Douglas. All rights reserved. Page
5 of 11
---------------------------------------------------------------------------------------------------------------------------
CLEAR NETWORK INFO
1. On the Motor, press and hold the push button on the Motor head for approximately 6 seconds.
2. The motor will jog two times after 6 seconds have elapsed.
3. On the Motor, continue to press and hold the push button on the Motor head for another 6
seconds.
4. The motor will jog two times after 12 seconds have elapsed.
5. On the Motor, release the push button.
6. The Network Id, Device_Id, Groups, Approved_Controller_Info, and Scenes are Reset.
---------------------------------------------------------------------------------------------------------------------------