User's Manual

■ Input video port selection of transmitter
The transmitter has a 3G SDI video input port and a HDMI video
input port, and the system will detect valid video source automatically of
SDI and HDMI port, and then switch it as main video input channel. If
both SDI and HDMI have valid video inputs, the system will take SDI
input as priority.
■ RSSI indicators
The receiver will calculate received RF signal strength internally and
The OLED Screen will indicate wireless signal power and quality. The
user can observe the OLED Screen status to know if the current wireless
link is reliable or not.
Signal Strength
indication
Wireless Link
quality
Video Quality
4-5 Strong Best
2-3 Middle Good
1 or no lit LED Weak Visible Video Noise
■ Frequency selection and configuration
The wireless suite can work in 5.1-5.9GHz frequency band and be
flexibly software configured to licensed or ISM band of global different
regions. Meanwhile, on the front of both transmitter and receiver have
OLED Screen, press the Green Button “-” and Button “+” to adjust the
channel. Please note: Transmitter and Receiver should keep in the same
channel. It provide maximum 10 workable frequency channels, and
support maximum 10 sets working simultaneously.