Operation Instruction

6.Trouble shooting

■Normal problems

a) No output on display

Please check the TX and RX power first, if TX or RX is powered

from battery or external power, please ensure the battery or external

power source can supply the power. Then check if TX antennas and RX

antennas are installed right. After that, check the Transmitter’s OLED

screen, if haven’t show the signal, then check SDI or HDMI cable is

plugged in and video source is ready please. Finally may check input

video format is compatible with this product.

b) Poor output video quality

Please check if SDI or HDMI input or output cable is plugged well,

then checks the OLED screen for wireless signal strength, there should be

at least 2-3 frames lit if the user want to get better video quality. If there

is only 1 frames lit, that means the received wireless signal is weak, and

should shorten the transmission distance or change the wireless

communication channel.