Specification Sheet

J9151A -HN
10GBASE-LR/LW SFP plus, 1310nmDFB, 10km, SMF
Page 1 of 2
J9151A HP Compatible
10Gbase SFP+ Transceiver
Features
• Supports 10GBASE Ethernet
• Transmission distance up to 10KM on SMF
• Hot-Swappable if your device supports
• Lifetime Warranty
• Plugs into SFP+ port
• Industry-standard LC duplex connector
• Compliant to SFP+ Electrical & Mechanical MSA
• Sub watt power consumption: 0.85W (typ.)
• 0°C to +70°C case operating temperature range
• Laser Class 1 IEC / CDRH compliant
• RoHS 6/6 compliant
• Compliant with product safety standards
Product Overview
The Hummingbird Networks 100% HP Compatible J9151A optical transceiver module is for transmission
at 1310nm over single mode fiber. It supports Ethernet standards which make it ideally suited for 10G
data communications. It offers customers a wide variety of 10 Gigabit Ethernet connectivity options for
data center, enterprise wiring closet, and service provider transport applications.
Its sub watt power consumption and its excellent EMI performance allow system design with high port
density. The small form factor integrates a 1310nm distributed feedback laser (DFB) in an LC package
and a PIN receiver. Module is lead free, RoHS compliant and is designed and tested in accordance with
industry safety standards.
The Transceivers convert information from electrical to optical format, and back again, at standard data
rates. The transmit path consists of an AC coupled 100 ohm differentially terminated driver coupled to a
highly reliable 1310nm DFB. The receiver path consists of a ROSA (receiver optical sub-assembly) for
optical electrical conversion, followed by a limiting amplifier to boost the electrical signal. A Loss of Signal
(LOS) status is provided to facilitate easy link detection.
Ordering information
Part No. Data Rate Laser Fiber Type Distance Optical Interface DDMI
J9151A-HN 10Gbps 1310nm SMF 10KM LR/LW No
Supported Standards
Application Standard Data Rate
IEEE 802.3ae-2002 10 GBASE-LR 10.3125 GBd