Operation Manual

Horizontal Mount: If you need to install the SCP110 Course Computer horizontally, you must

change the connector and the mounting as shown below:

SCP110 Horizontal Mounting

In a horizontal mounting, the Course Computer is mounted on a flat, horizontal surface such as the

deck.

Mount the Course Computer on a stable, flat surface. The removable cover must be secured and

face up. The Course Computer will not work if it is mounted hanging overhead. Also, confirm that

the box is level. See the above illustrations for more information.

NOTE: Do NOT mount the Course Computer upside down.

NOTE: The Gyronav chip must face the sky. See the above illustrations for proper installation. A spare

connector is included in the Course Computer box.

TB23 Gyronav

PIN #1

MAX

Gyronav Wiring Gyronav Mounting

0˚

10˚