Operation Manual

4
Vertical Mount: The default configuration is for a vertical Course Computer mount as shown
below:
SCP110 Vertical Mounting
In a vertical mounting, the Course Computer is oriented horizontally on a vertical surface such as
the bulkhead.
Mount the Course Computer on a stable, flat surface. The removable cover must be secured and
face out. The cables must hang down. Confirm that the box is level horizontally.
NOTE: Do NOT mount the Course Computer so that the cables protrude from the right, left, or top. The
cables must hang straight down for accurate installation and operation. See the above illustrations for more
information.
NOTE: The Gyronav chip must face the sky. See the above illustrations for proper installation.
OR
TB23 Gyronav
PIN #1
MAX
10˚ 10˚
Gyronav Wiring Gyronav Mounting