Operation Manual

19
Optional Chartplotter
An optional Chartplotter/Multi-Function Display can be connected to the autopilot through the
NAV1 input port.
This data line is a NMEA0183 input port. Be sure that the baud-rate is set to 4.800 and, at least,
one of the following sentences is enabled: [APA] or [APB] or [BOD+RMB] or [BOD+XTE] or
[BOD+XTR].
This instrument should be connected to the Course Computer using the supplied standard cable,
TB1 NAV1 NMEA0183 INPUT connector.
SCP110
TB1
WHITE
BROWN
SHIELD
WHITE
BROWN
SHIELD
DATA
+
DATA –
SHIELD
NAV1