Operation Manual

10
Linear Rudder Feedback
The Linear Rudder Feedback could be present or not, depending on the product.
This is another key element of the autopilot. It is mechanically linked to the outboard engine and
it informs the system on its real position.
It is important that it is installed following the detailed instructions supplied in the box.
Since the Linear Rudder Feedback is not the default setting, you should enter the INSTALLATION
MENU and set the FEEDBACK TYPE to LF n.
The Linear Rudder Feedback should be connected to the Course Computer using its own cable,
TB4 COMPASS and TB5 FEEDBACK connectors.
Linear Feedback
SCP110
TB4
TB5
RED
BLACK
WHITE
SHIELD