Operation Manual

9
FB30 Rudder Feedback
The FB30 Rudder Feedback could be present or not, depending on the product.
This is another key element of the autopilot. It is mechanically linked to the section of the rudder,
and it informs the system on its real position.
It is important that it is installed on a firm, rigid support respecting precisely the suggested
mounting scheme.
Any slack both on the coupling bar and the rudder sector should be eliminated or the measured
rudder angle will be incorrect and the whole system will become inaccurate and critical.
The FB30 Rudder Feedback should be connected to the Course Computer using the supplied
standard cable, TB5 FEEDBACK connector.
FB30
SCP110
TB5
WHITE
BROWN
GREEN
YELLOW
WHITE
BROWN
GREEN
YELLOW
SHIELD