Operation Manual

7
SC110 Control Head
This is the “cockpit” of the autopilot, and it is through this unit that the user instructs the system
about the operations that should be executed.
See the SC110 Installation and Operations Manual for instructions and guidelines for mounting
the control head. Install the Control Head on the main deck, in a position where it will be easily
reached and controlled: carefully chose the proper location and orientation so that the display will
be perfectly readable from the operating position. If the Control Head is flush-mounted in the
cockpit, special attention should be given to the placing angle in order to ensure a perfect reading
of the display. Even if the display has the back-light, if badly oriented the reading of all information
data will be difficult.
The Control Head can be installed also using an optional bracket. In this case, the visual angle can
be easily changed by the user himself when necessary. Visit our Web site at humminbird.com or
contact our Customer Resource Center at 1-800-633-1468 for more information.
The Control Head is splash-proof, but it is not supposed to operate UNDERWATER! Thus, if
externally installed, take care to position it in a shielded area with its protective cover.
The SC110 Control Head should be connected to the Course Computer using the supplied cable
(490343-2) in the TB7 CONTROL UNIT 1 connector.
SC110
SCP110
TB7
POWER/CPU
490343-2
RED
WHITE
GREEN
BLACK
SHIELD
POWER / CPU
ACCESSORY