User Manual

7
Overtime
Disconnect
Jumper Cable
Reverse
Charge /
Over-voltage
Disconnect
Jumper Cable
Overheat
Cool down for
10 minutes
No Green Light On:
Please make sure correct connection, then
press the BOOST button by 3 seconds until
Green Light On means ready to start.
• Allowable time frame for jump starts
after connected: Boost Mode - Max. 10
seconds; Standard Mode - Max. 50 seconds
• Do not crank the engine for more than
3 seconds.
• If jump start fails, disconnect jumper
cable, and reconnect.
Jump starting warnings!
Clean:
SOS
3 Attempts