Quick Start Guide

Pairing
mode
Pairing
button
(4)
will
flash
red
quickly
Paired
in
Bluetooth
mode
Pairing
button
(4)
will
turn
white
TWS
pairing
multiple
XB70
speakers
Pairing
button
(4)
will
flash
red
slowly
TWS
Paired
(master
speaker)
Pairing
button
(4)
will
be
solid
white
TWS
Paired
(Slave
speaker)
Pairing
button
(4)
will
be
solid
white
Battery
low
Power
button
(1)
will
flash
red
every
10
seconds
Charging
battery
Power
button
(1)
will
be
solid
red
Charging
complete
(around
95%)
Power
button
(1)
will
be
solid
white
Indoor
360
Sound
ON
360
Sound
button
(9)
will
be
solid
red
Outdoor
360
Sound
ON
360 Sound button (9) will flash red once every 3
seconds
Shelf
Sound
ON
360
Sound
button
(9)
will
be
solid
white
Party
Mode
lighting
ON
Party
Mode
button
(6)
will
be
solid
red
Light Mode lighting ON Lightmode button (5) will be solid red
BLUETOOTH
PARTY
SPEAKER
QUICK START GUIDE
XB70
SAFETY INSTRUCTIONS
Toensure proper operation of the products and prevent fire or shock hazard, please carefully read all
information contained in these Safety instructions.
The lightning flash with
arrow head symbol, within
an equilateral triangle, is
intended to alert the user to
the presence of uninsulated
"dangerous voltage" with at
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
Warning: to reduce the risk of
electric shock, do not remove
cover(or back).No
user-service able parts in
side .Refer servicing to
qualified service personnel.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
IMPORTANTINSTRUCTIONS:
1. Ensure the plug is fully inserted into the wall outlet and the product is operated on an electric
power source matched to its rated voltage.
2. Never operate the product if the cord or adaptor is damaged or overly hot.
3. Donot modify the cord or damage it in any way such as by bending, twisting or pulling on it
unnecessarily
4. Donot attempt to modify, repair or in any way dismantlethe product, other than when discarding
it at the end of its useful life.
5. Never unplug this product with wet hands.
6. Unplug the product from the wall outlet before cleaning and maintenance. Do not use liquid
cleaners or aerosol cleaners.
7. The power cord should be unplugged from the wall outlet when unused for a long period of time.
8. Keep and store this productin dry and moisture-free areas at all times.
9. Do not use this product near water, or any other heat sources or other apparatus that produce
heat.
10.Battery shall not be directly exposedto sunshine and fire.
11. Do not attempt to replace the battery. For repairing and servicing, please consult from the store of
purchase or customer service centre designated by the store.
12. Do not use any other power supply other than the one specially designedfor this product.
13.Keep this operating instruction in a safe place.
14.Contact an authorized service centreif you have any inquiry about this product.
IP 67
The speaker is rated IP67. The 6 means that the XB70 is protected against dust and contact. No
ingress of dust permitted. The 7 means it protects from ingress of water when the enclosure is
immersed in waterata depth of 1m for up to 30 minutes.
• To ensure that the XB70 is water resistant, please remove all cable connections and tightly close
the AUX/DC IN cap; exposing the speaker to liquids without doing so may result in permanent
damage to the speaker.
• Do not expose the XB70 to water while charging; this is very dangerous as doing so may result in
personal injury and permanent damage to the speaker or power source.
• IP67ratingis defined as the XB70can stand immersion of 1 metre for up to 30 minutes.
• Wedo not recommend leaving the XB70 outside at night time in wet conditions or when it’s raining.
Storein a dry place while not in use, this will prolong the speakerslife.
CAUTION:
• Danger of explosion if battery is incorrectly replaced.
• Batteries may malfunction if they are not used for extended periods
• Over time, unused devices will discharge and must be recharged before use
• Disconnect the charger from power sources when not in use
• Use the batteries only for their intended purposes
• Follow all instructions in this manual to ensure the longestlifespan of your deviceand battery.
Damages or poor performance caused by failure to follow warningsand instructions can void your
manufacturer’s warranty
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like
FCC ID: LMZ-70070
IC ID: 10306A-70070
ICStatement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following tw
o conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operat
ion of the device.
The term “IC: “ before the certification/registration number only signifies that the Industry Canada tec
hnical specifications were met. This product meets the applicable Industry Canada technical specific
ations.
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d&a
pos;Innovation, Sciences et Développement économique Canada. L'exploitation est autorisée
aux deux conditions suivantes: (1) l'appareil ne doit pas produire debrouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même s
i le brouillage est susceptibled & apos; en compromettre le fonctionnement.
FCCStatement
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiateradio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experiencedradio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and (2) this device must accept any interference
received,including interferencethat may cause undesired operation.
This device has been evaluatedtomeetgeneralRF
exposurerequirement.The devicecan be used in portable exposure condition without restriction.
TheBluetooth®wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
anyuse of such marks by Britelite Enterprises is under license. Other trademarks and trade names are
thoseof their respective owners
SPECIFICATION:
RMSPower:40W (Peak Power:400W)
Frequency Response: 60Hz – 20KHz
Signal to noise: >60 dB
Bluetoothversion:BluetoothV5
BluetoothFrequency: 2402-2480MHz
Bluetoothrange: Up to 10m
Transmission power <4dBm
Input: DC 5V 2A
Battery:11.1V 2000 mAh
Batteryworking hour: up to 13 hours @50% Volume (LED OFF)
Chargingtime: up to 5 hours
Themain unit Meas: H220 x W175 x D 175 (mm)
Themain unit Weight:2.2kg
UNPACKING:
Check that all the following items should be included in the box.
-Main Unit
-USB charging cable
-User Manual
Functions
1.
Power
Button
2. Volume+/ Next Track
3. Volume– / Previous Track
4. Pairing Button
5. LightMode Button
6. Party Mode Button
7. Lighting/ Strobe Button
8. Color Button
9. 360 Sound Button
10.Micro USB Charging Port
11. Aux-inPort
Gettingstarted
Charging the battery:
Givethe speaker a full charge beforeits first use:
1. Connect the supplied Micro USB chargingcable to the Micro USB charging port (10) and plug into
power
2. The Power button(1) will be solid red whilst charging which will take up to 5 hours
3. Oncefully chargedthe Power button (1) will turn white
Note:
• Allow up to 5 hours for the first charge. You can playyourspeakerwhilst it is being charged, but
this will affect the charging time.
• Due to the large battery we recommend regularly charging the battery whenever practical. This
will also help to ensure the longevityof the battery’s life.
• Whenthe batteryis in power saving mode, the XB70volumewill be limited to 50%. Please
rechargethe batteryfurther if you wish to increase the volume.
QuickStart
1. PowerOn bypressing Powerbuttonfor2 seconds.
2. Turn on your device’s Bluetooth and connect to ‘XB70’.
3. Use the buttons on the handle control panel to adjust lighting, add strobes and change up the
audio modes.
LightModes PartyMode Lighting/Strobes ColorSelection 360 Sound
LED lights indication
Pairing
the
XB70
to
your
device
1. Press Power button (1) for 2 seconds to turn the speakeron and it will automatically enter pairing
mode
2. Turn your Bluetooth device’s Bluetooth ON and search for new devices
3. Select ‘XB70’. If asked for a passcode, enter ‘0000’,and the device will pair
4. Once connected the Pairing button (4) will turn white.
Re-pairing or pairingnew devices
1. Turn Bluetooth connectivity off on any previouslypaired devices
OR
2. Press the Pairing button (4) to re-enter pairing mode
3. Follow the ‘Pairing the XB70 to yourdevice’ instructions
Note: If a previously paired device is not present within the Bluetooth connectivity range then the
speakerwill re-enterpairing mode.
TWSpairing two XB70speakers
1. Press Power button (1) to turn on both ofthe speakers that youwish to pair together.Both
speakerswillautomaticallyenterpairing mode.
2. Double press the Pairing Button (4) on either of the speakers and it will enterTWS pairing. The
pairing button (4) will flash red on the master speaker.
3. Once connected in TWS pairing both speakers will commence party lighting in sync.
4. Follow the ‘Pairing the XB70 to yourdevice’ instructions to pair your device to either XB70.
5. Once connected the Pairing button (4) will turn white.
Disconnecting two XB70 speakersfromTWS
Double press the pairing button (4) on either of the paired speakers to disconnect them from TWS
pairing.
Playing music on your speaker
Bluetooth
When connected via Bluetooth, play music on your device and the sound will play through the speaker.
Some devices may require you to select the audio output.
Auxiliary
Plug the Aux cable (not included) intothe speaker’s Aux-inPort (11) and your device.