Brochure
2
3
4
5
7
6
8
9
2
C
odiernut
3
1
6
D
e
t
a
il
A
10
7
9
11
D
e
t
a
il B
55
45
°
45
°
45
°
45
°
coding groove
Signal Connectors / Assembly Instructions
Right Angle Connectors
- Push dome nut (1), clamping insert (2), adapter (3) and angled body (4)
over the cable
- Strip the cable jacket back 20 mm (3/4“)
- Strip the wire ends 4 mm (5/32“) max.
- Solder or crimp the contacts
- Push the contacts into the insert (6)
- Fold the spacer (5) around the wires and push it on the insert (6)
- Push the insert (6) with the spacer (5) into the housing (7, 8).
Pay attention to the desired coding (coding groove, coding key)!
- Slide assembly tool (9) into the swivel nut and push it onto the angled body (4).
Pay attention the the desired position (8 possibilities)!
- Screw the nut (7) and the angled body together
- Screw the adapter (3) and the angled body together
- Push the clamping insert (2) into the adapter (3) and tighten the dome nut (1)
Right Angle Connectors, EMI
Dimensions and specifications may be changed without prior notice
coding groove
detail A
detail B
- Slide dome nut (1), clamping insert (2), adapter (3), EMI ring (4) and angled body (6)
over the cable
- Strip the cable jacket 37 mm (1-1/2“). Shorten the braided shield to 10 mm (3/8“)
- Fold the braided shield over the cable
- Push the EMI ring (4) over the wires onto the braided shield.
Caution: Don’t push the EMI ring behind the braided shield (detail A)!
- Solder or crimp the contacts
- Push the contacts into the insert (8)
- Fold the spacer (7) around the wires and push it on the insert (8)
- Push the insert (8) with the spacer (7) into the housing (9, 10).
Pay attention to the desired coding (coding groove, coding key)!
- Slide assembly tool (11) on to the housing (9, 10) and push it onto the angled body (6).
Pay attention to the desired position of the angled body (8 possibilities)!
- Screw the nut (9) and the angled body together
- Screw the adapter (3) and angled body (6) together
- Push clamping insert (2) into the adapter (3) and tighten the dome nut (1) to grip and
seal the cable