Brochure

50
www.hummel-group.com
www.hummel-group.com
Dimensions and specifications may be changed without prior notice
Emergency release
Adjusting screw
Crimp jaws
Eccentric dial (A /B/C/D)
12 position locator
Crimp Tool
Crimp tool ......................................................................7000 900 900
Application
The 4-jaw crimp tool 7000 900 900 has been developed for optimal crimping of
machined pin and socket contacts with wire ranges from 0.8 to 2.5 mm
2
. The tool should
only be used for the application described below. The mnaufacturer cannot be held liable
for damages caused by improper use or unauthorized modificatons of the tool.
Operation
- The reference sheet enclosed with each tool designates which contacts the positioner
accommodates by wire size and locator setting
- Position is dialed by raising the locator knob and rotating it to the proper
position (1-12)
- Crimp depth setting is selected by raising and rotating the dial to the requested
position (A/B/C/D)
- Insert the contact to be crimped through the hole and push against the stop
- Close the handles to the first lock-in position of the tool
- Insert the properly stripped cable into the contact as far as possible
- Press the handles together until the tool automatically releases
- Remove the crimped contact
Type Part Number
Crimp Tool
Crimp Tool for Signal Connectors