Full Product Manual

Humidex
7
Accessories will vary on which unit was purchased.
HCS Basement unit and HCS Crawlspace unit
1x Owner’s Manual
1x Checklist
1x Warranty Card
1x Aluminum tape
1x Vinyl Flex 6” x 24”
4x Truss screws #8 x1 ¼
1x Exhaust Vent 6”
6x #8 x ½” Screws
1x DC Power block
1x Stand for control
1x Pipe 6” x 8”
** 2x 4” x 10” Toe Space Grill
** Only included with HCS-CS Model (Crawlspace)
HCS Apartment Unit
1x Owner’s Manual
2x Cable Ties
1x Warranty Card
1x Aluminum Tape
1x Vinyl Flex 6” x 24”
4x Plastic Anchors
1x Exhaust Vent 6”
8x #8 x 2” Screws
1x Checklist
6x #8 x 9/16” Screws
1x Pipe 6” x 8”
HCS Booster Unit
1x Owner’s Manual
6x #8 x 9/16” Screws
1x Warranty Card
4x #8 x 2” Screws
1x Universal Boot
4x #8 x 1¼” Truss Screws
6Ft. 6” Insulated Flex
1x 4” x 10” Toe Space Grill
8x Cable Ties
4x Plastic Anchors
1x 6” Damper
25ft 6” non-Insulated Flex
1x 6” by 6” by 6”
Galvanized T
Additional grilles for replenishment air and interior rooms not included.
Tools Required for Installation
- Electric reciprocal or hole saw 6¼”
- Drill with a ¼” concrete bit
- Phillips or Robinson Screw Driver
- Measuring Tape