Manualshelf

Full Product Manual

ManualsBrandsHumidex ManualsDehumidifiersAutomated Apartment Digital Ventilation System/Dehumidifier for 2000 sq.ft. with Wi-Fi/Remote Control
31323334353637383940
Humidex
33
myHome Mobile Application
The myHome Humidex line can be directly controlled from the myHome application available on the
Google play store for android devices and the App Store for Apple devices. Once installed, the
application will walk you through its different features and show you how to link your HCS myHome
unit to your mobile device. The application will provide you with the ability to monitor conditions,
modify settings of your unit as well as notifying you of potential problems or updates.
Note: The unit will operate with all of it’s features without the need to connect it to your home’s
Wi-Fi (Internet). Wi-Fi is only necessary when the mobile app is being used for controlling and
monitoring the system. Consider a Wi-Fi booster if the signal is weak.
Wi-Fi internet connection and mobile application
The HCS myHome possesses many cool and new features that allows you to monitor your home’s air
quality, view outside conditions, receive notifications and software updates regarding your system, and
more… To have access to these features, the HCS unit must be connected to the internet. Provided
you have Wi-Fi internet connection in the home, this can be done by downloading the myHome
mobile application and configuring your system with it. This is a one-time process that will allow your
system to connect to your internet and access all the necessary information needed.
You can use the QR Code below to go directly to the mobile app’s download page. Or you can search
within the app store using keywords such as “ClairiTech” and “myHome”
Once installed, the application will walk you through its different features and show you how to link
your HCS myHome unit to your mobile device. The application will provide you with the ability to
monitor conditions, modify settings of your unit as well as notifying you of potential problems or
updates.
Note: For security reasons, your system will not allow itself to be set up after 6 hours of continuous
operation. If your system was installed and/or has been operational for over 6 hours, selecting the
Enable Pairing option in the Menu of the control will allow mobile pairing. Alternatively, to obtain
similar results, a reboot can be done by unplugging the unit for 15 seconds and then plugging it back
in.