Full Product Manual

Humidex
32
Enable Pairing
The Enable Pairing allows users to turn on the pairing feature to connect to the system. The system
has a built-in auto-hide feature for security purpose 6 hours after the initial setup. This feature is
used to connect the myHome Mobile application to the exhaust (see page 33). To enable pairing,
press the OK button once the Enable Pairing is selected in the Menu.
System Reboot
The System Reboot allows user to manually reboot the system. This will reboot the entire system.
To reboot the system, press OK once the System Reboot is selected in the Menu. Select YES to
confirm.
Note: If for some reason the controller is not connected to the exhaust, a secondary prompt will
appear advising you that a reboot of the exhaust will not occur.